No.120, 1/N, 1/F, Saige Electronics Market, Dongguan

0769-86334010/86380310

Copyright © 2017 Dongguan Jian Chang Metal Product Co.,Ltd    Powered by

/
Company news
/
How to prevent the end subclass metal mould from distortion when pressing

How to prevent the end subclass metal mould from distortion when pressing

Many hardware mold processing operation personnel in the subclass metal stamping mold, will always encounter terminal overwhelm the distortion etc. Now, how do we go to solve this problem? Jianchang hardware and mould manufacturers to share the prevention methods.

First of all, we are doing the terminal subclass hardware stamping, First of all, we should pay attention to whether the hardware mould itself has the problem of short guide feet, so that the hardware mould can meet the stamping standard。 Secondly, it is necessary to adjust the pressure material force of the pressure plate, and the pressure force should be suitable to meet the material requirements。 Finally, we should pay attention to the position of the adjustment pressure on the pressure plate。 We should try to concentrate the pressure position near the blanking area and highlight the stamping part。 I believe that if you follow the above steps, you will be able to complete the stamping of the hardware mold of the terminal subclass successfully。 (luna)

广东快乐十分 广东快乐十分 重庆快乐十分 广东快乐十分 重庆快乐十分 广东快乐十分 上海11选5 上海11选5 上海11选5 重庆快乐十分